BMMTN - S-110 TRU-TEST SUPREME SILICONE MASONRY SEALER
- MSDS: BMMTN
- Manufacturer: TRU TEST MANUFACTURING COMPANY
- Product Name: S-110 TRU-TEST SUPREME SILICONE MASONRY SEALER
- National Stock Number: 8010-00F021868
Product Identification
Product ID:S-110 TRU-TEST SUPREME SILICONE MASONRY SEALER
MSDS Date:07/24/1990
FSC:8010
NIIN:00F021868
MSDS Number: BMMTN
Responsible Party
CARY, IL 60013
Emergency Phone: 1-800-228-5635
Info Phone: 1-800-639-5383
Cage: TRUTE
Contractor
Telephone: 708-639-5383
Cage: TRUTE
Ingredients
6.5 LBS
RTECS: 9999999WG
KEROSENE (PETROLEUM), HYDROTREATED; PETROLEUM DISTILLATE,
CAS: 64742-47-8
RTECS: OA5504000
Fraction By Weight: 95%
<750 GM/L
RTECS: 9999999VO
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES: IRRITATION. SKIN: DRYING.
INHALATION: HEADACHE, DIZZINESS & NAUSEA.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:EYES: IRRITATION. SKIN: DRYING. INHALATION:
HEADACHE, DIZZINESS & NAUSEA.
First Aid
First Aid:EYES: WASH W/FRESH WATER. SKIN: WASH W/WARM WATER & SOAP.
INHALATION: REMOVE TO FRESH AIR. APPLY ARTIFICIAL RESPIRATION IF
NECESSARY. INGESTION: DON'T INDUCE VOMITING. KEEP PERSON WARM &
QUIET. OBTAIN MEDICAL ATTENTION IN ALL CASES.
Fire Fighting
Flash Point:105F
Lower Limits:0.9%
Extinguishing Media:FOAM, CO2, DRY CHEMICAL, OR WATER FOG.
Fire Fighting Procedures:TREAT AS A VOLATILE LIQUID FIRE. WATER SPRAY
MAY BE INEFFECTIVE. IF WATER SPRAY IS USED, FOG NOZZLES ARE
PREFERABLE.
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE WHEN
EXPOSED TO EXTREME HEAT.
Accidental Release
Spill Release Procedures:ELIMINATE ALL IGNITION SOURCES. CONTAIN SPILL,
ABSORB W/CLAY, SAND OR FLOOR ABSORBENT.
Handling
Handling and Storage Precautions:KEEP AWAY FROM HEAT, SPARKS & OPEN
FLAMES. FOR STORAGE CONDITIONS SEE OSHA 1910.106. DON'T TAKE
INTERNALLY. GROUND CONTAINERS WHEN POURING.
Other Precautions:AVOID CONTACT W/SKIN. AVOID FREE FALL OF >2-3 INCHES
WHEN POURING.
Exposure Controls
Respiratory Protection:USE A NIOSH/MSHA JOINTLY APPROVED AIR SUPPLIED
RESPIRATOR IF >TLV. USE AN APPROVED MECHANICAL FILTER TO REMOVE
SOILD AIRBORNE PARTICLES OF OVERSPRAY DURING APPLICATION.
Ventilation:PROVIDE SUFFICIENT MECHANICAL (GENERAL &/OR LOCAL EXHAUST)
TO KEEP
Eye Protection:SAFETY EYEWEAR
Other Protective Equipment:IMPERVIOUS CLOTHING & BOOTS.
Work Hygienic Practices:WASH HANDS BEFORE EATING, SMOKING OR USING
BATHROOM. DON'T REUSE CONTAMINATED CLOTHING.
Supplemental Safety and Health
BOILING RANGE: 300-380
Chemical Properties
Boiling Pt:B.P. Text:SEE SUPP
Vapor Density:>AIR
Evaporation Rate & Reference:SLOWER THAN ETHER
Percent Volatiles by Volume:95%
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Stability Condition to Avoid:HEAT, OPEN FIRE, SPARKS, OPEN FLAME OR
OTHER SOURCES OF IGNITION.
Disposal
Waste Disposal Methods:CONTAMINATED ABSORBENT MAY BE DEPOSITED IN A
LANDFILL IN ACCORDANCE W/LOCAL, STATE, & FEDERAL REGULATIONS.
PREVENT RUN-OFF TO SEWERS, STREAMS OR OTHER BODIES OF WATER.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.